streak camera
rus eng
streak camera
Streak cameras and frame tubes Streak camera and frame cameras Optical pulsed generators Digital readout systems Accessory equipment

К011 nine-frame camera

 
Application:

   The camera is intended for registration of images of fast running processes in a near infra-red and visible spectral range and measurements of their spatially-temporal parameters in 9-frame mode of recorded image. Record of the image from a streak tube screen is made by means of CCD readout unit with image input in the personal computer. Software provides the user with wide possibilities of processing the recorded image. 

Articles [49-52, 58, 61, 63] in "Publications" section are devoted to application of this camera.

Possible fields of application: 
  • ballistics;
  • combustion, detonation and explosion;
  • shock waves physics;
  • laser physics;
  • plasma physics including thermonuclear synthesis;
  • electrical breakdowns and discharges including lightning.
The main components of the camera: 
  • input objective F = 50 mm (a set of the objectives is available);
  • electromechanical shutter;
  • PIM-112 time-analyzing ICT with S20 photocathode applied on a fiber-optic disk, two pairs of deflecting plates, one microchannel plate (MCP) and phosphor screen applied on a fiber-optic disk;
  • power supply unit;
  • control unit totally controlled by a computer;
  • RU-05M CCD readout system (1392x1032 pixels, 12-digit ADC, linear dynamic range ≥ 300) with an electrical (≤ 5 m) or fiber-optic (≤ 500 m) communicational line with the computer;
  • notebook with installed software;
  • neutral filter of 0.5, 1 and 2 density set on the input objective or its site;
  • frame window, which is set closely to the photocathode's fiber-optic disk and limits a sizes of a frame field;
  • frame test-object, which can be set closely to the photocathode’s fiber-optic disk for control of a spatial resolution;
  • fixing plate for mechanical fixation of the camera on a work site. 
    Main parameters:
Range of spectral sensitivity, nm ≤ 370 – ≥ 850
Photocathode sensitivity at the maximum of spectral characteristic, mA/W ≥ 20
Maximum gain, W/W ≥ 5000
Programmed duration of any frame, µs 0.1 - 100
Programmed duration of any  interframe pause, µs 0.1 - 100
Step of change of a frame duration and duration of interframe pause, μs

20

Photocathode spatial resolution, l.p./mm ≥ 7.5
Maximum triggering frequency limited by the CCD TV camera, Hz 7
«Dead» time , ns ≤ 250
Programmed additional delay of triggering (with 20 ns step), ms 0 – 1.3
Frame dimensions at the photocathode, mm × mm 7.5 x 7.5
Length of communicational link between the camera and a computer, m:  
- electric cable 5
-fiber-optic cable ≥100
Dimensions: length х width х hight, mm х mm х mm 400x120x220
Weight, kg ≤ 4
Supply voltage, V:  
- alternating current with 50-60 Hz frequency, 85 – 242
- constant current (option) 18 – 36
Power consumption, W ≤ 20
 
Operational Conditions    Delivery Set
   

Temperature 

283 - 308 K

Humidity

80 %

Pressure

95 - 105 kPa

  • K011 camera
  • Notebook with software
  • Certificate with description and maintenance instruction
  • Case